‘serving the hydraulics industry for over 30 years’
+44 (0)1172 130042
MTC Hydraulic Valves
Hydraulic Single Pilot Operated Check Valve Line Mounting
Connect the actuator port to be controlled to ‘A2’
and the pressure flow to ‘A1’. Other ports ‘U1’
or ‘U2’ can be connected with pilot pressure in
the same way.
Yellow Zinc Plated
Cracking pressure 4 BAR
When the first actuator exceeds the pre-set pressure, the
valve opens and allows flow to second actuator. To adjust
the setting of the spring, remove the cap from the end of
the cartridge and adjust clockwise to increase the setting
and anti-clockwise to reduce the setting. A free flow check
allows reverse flow from port ‘T’ to port ‘P’.
Setting range 40 to 210 BAR.